Updated 3 Feb 2021

This package provides a sample script and inputs for running an onroad FF10
through SMOKE as a nonpoint sector with SAPRC07TC speciation. It includes:
- a sample run script
- INVTABLE, GSPRO, and GSREF for running onroad as a nonpoint sector using
  SAPRC07TC speciation
- new temporal profiles and cross-references (ATREF, ATPRO_WEEKLY, ATPRO_HOURLY)
- INVTABLE and TOX_FILE for creating MOVES-compatible speciation profiles for
  other mechanisms in the Speciation Tool
  
The sample script is intended to show the appropriate inputs and settings to
use for processing onroad emissions through SMOKE in this fashion. The sample
script can be adapted to process cases other than the example case upon which 
this was based, or you can adapt scripts from other public packages to include
the inputs and settings from the sample script. Either way, these inputs are
compatible with any monthly onroad FF10 which contains the pollutants
EXH__NONHAPTOG, EVP__NONHAPTOG, EPM__NONHAPTOG, and RFL__NONHAPTOG, as most 
SMOKE-MOVES-based FF10s from EPA platforms in the last few years do.

This package does not include an onroad FF10 on its own. Several onroad FF10s
are available on EPA FTP and can be used with this script. For example, the
onroad FF10 for 2017NEI is available here:
ftp://newftp.epa.gov/air/emismod/2017/2017emissions/2017gb_onroad_SMOKE-MOVES_emissions_FF10_29jun2020.zip

This package also does not include other ancillary files, e.g. spatial 
surrogates and gridding cross-references, which are needed to run SMOKE. Those
other ancillary files are available in existing packages - for example, the 
2017NEI package: ftp://newftp.epa.gov/air/emismod/2017/

The speciation profiles included in this package are for the SAPRC07TC 
mechanism. The profiles in this particular package should ONLY be used for 
processing the onroad sector, because additional HAPs are integrated in 
MOVES which are not normally integrated for other sectors. SAPRC07TC profiles 
which can be used for other sectors are available in a separate package:
ftp://newftp.epa.gov/air/emismod/2017/ancillary_data/ge_dat_for_2017gb_speciation_SAPRC_15jan2021.zip

For those who wish to process emissions for other speciation mechanisms, two
Speciation Tool inputs are provided in this package: an INVTABLE
(invtable_for_speciation_tool_MOVES_integration.txt - note that this is NOT the
same INVTABLE that we use for SMOKE), and a TOX_FILE which specifies the HAPs
that are integrated in MOVES. You may run the Speciation Tool with this INVTABLE
and TOX_FILE for the "INTEGRATE" and "HAPLIST" run types to prepare a new onroad 
GSPRO for your mechanism of choice. It is important that you prepare INTEGRATE 
(NONHAPTOG) and HAPLIST profiles using this INVTABLE and TOX_FILE because the 
NONHAPTOG emissions in our onroad FF10 inventories assume that all of the HAPs 
listed in the TOX_FILE have been subtracted out. Once you have a new onroad 
GSPRO for your particular mechanism (INTEGRATE + HAPLIST), you will need to 
manually copy all other pollutants (PM species, NOX, CO, NH3, SO2) from the 
GSPRO in this package into your new GSPRO. Then you are good to go for onroad 
processing. For all other SMOKE inputs, including the GSREF and INVTABLE, use 
the same inputs as for SAPRC.
