STORET Result Remark
Note: EPA no longer updates this information, but it may be useful as a reference or resource.
This web site provides query access to over 200 million monitoring records originally reported to EPA via the Legacy STORET System.
| Code | Description |
|---|---|
| A | Value reported is the mean of two or more determinations. |
| B | Results based upon colony counts outside the acceptable range. |
| C | Calculated. Value stored was not measured directly, but was calculated from other data available. |
| D | Field measurement. Some parameter codes (e.g., 401 "Field pH") imply this condition without this remark. |
| E | Extra sample taken in composting process. |
| F | In the case of species, F indicates Female sex. |
| G | Value reported is the maximum of two or more determinations. |
| H | Value based on field kit determination;results may not be accurate. |
| I | The value reported is less than the practical quantification limit and greater than or equal to the method detection limit. |
| J | Estimated. Value shown is not a result of analytical measurement. |
| K | Off-scale low. Actual value not known, but known to be less than value shown. |
| L | Off-scale high. Actual value not known, but known to be greater than value shown. |
| M | Presence of material verified, but not quantified. Indicates a positive detection, at a level too low to permit accurate quantification. In the case of temperature or oxygen reduction potential, M =a negative value. In the case of species, M=male sex. |
| N | Presumptive evidence of presence of material. |
| O | Sampled for, but analysis lost. Accompanying value is not meaningful for analysis. |
| P | Too numerous to count. |
| Q | Sample held beyond normal holding time. |
| R | Significant rain in the past 48 hours. |
| S | Laboratory test. |
| T | Value reported is less than the criteria of detection. |
| U | Material was analyzed for, but not detected. Value stored is the limit of detection for the process in use. In the case of species, Undetermined sex. |
| V | Indicates the analyte was detected in both the sample and associated method blank. |
| W | Value observed is less than the lowest value reportable under remark "T." |
| X | Value is quasi vertically-integrated sample. |
| Y | Laboratory analysis from unpreserved sample. Data may not be accurate. |
| Z | Too many colonies were present to count (TNTC), the numeric value represents the filtration volume. |
| $ | Calculated by retrieval software. Numerical value was neither measured nor reported to the database, but was calculated from other data available during generation of the retrieval report. |
![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif)