TSMERMSG_IS_NUMBER TSMERMSG_ORG_ID MESSAGE_ID MESSAGE_TEXT DESCRIPTION_TEXT D_USERID_CODE D_LAST_UPDATE_TS 149 ZZZZZZZZ B00237 Parent referenced more than once for this Field Activity. The Parent Field Activity appears in the input file more than once for a given child Field Activity creation. STORUSER 18-NOV-98 150 ZZZZZZZZ B00238 Field Meas/obs cannot have a Biological medium. Activity Category is Field Meas/Obs, yet Medium is Biological. Valid Medium choices for field measurements/observations are: air, water, soil, and sediment. STORUSER 18-NOV-98 151 ZZZZZZZZ B00239 Biological samples require an Intent. The Medium of this Field Activity is Biological, but you have omitted the Intent record. STORUSER 18-NOV-98 152 ZZZZZZZZ B00240 Biological Tissue samples require a Bio Part. The Intent of this Field Activity is Tissue, but you have omitted the Biopart record. STORUSER 18-NOV-98 153 ZZZZZZZZ B00241 Biological Individual Sample from Samples are not allowed. An Intent record of Individual was found; this is invalid for Sample from Samples. Only Tissue and Taxon Abundance are permitted here. STORUSER 18-NOV-98 154 ZZZZZZZZ B00242 Subject Taxon is required for Biological Tissue and Individual samples. Intent is either Tissue or Individual, yet you have omitted the Subject Taxon record. STORUSER 18-NOV-98 155 ZZZZZZZZ B00243 Field Activity Depth information is not supported for Sample from Samples or Composite with Parents. When the Activity Category is either Created from Sample or Composite-with Parents, you may not supply any of the values and descriptors associated with depth. STORUSER 18-NOV-98 156 ZZZZZZZZ B00244 Bio Part name not found in STORET. The Biopart Name found in the batch file does not match any Biopart Name defined in STORET. STORUSER 18-NOV-98 158 ZZZZZZZZ B00246 Air medium is invalid for Sample from Samples. When the Activity Category is Created from Sample, a Medium of Air is not permitted. STORUSER 18-NOV-98 144 ZZZZZZZZ B00232 Trawl Operation Detail Relative Current Wind Msr must be between 0 and 359. A Trawl Relative Wind Direction record is present, but the value is not within the acceptable range of 0 through 359. STORUSER 18-NOV-98 1 ZZZZZZZZ B00001 File could not be found or read. Probable typographic error in the file name or path. STORUSER 18-NOV-98 2 ZZZZZZZZ B00002 File/Instructions out of sequence. See documentation for mandatory data sequencing rules. STORUSER 18-NOV-98 3 ZZZZZZZZ B00003 Batch ORG ID does not match currently selected ORG. The Organization ID found in the batch file is different from the one you are using on the Interactive screens. Either correct the file, or "CLOSE" screens in STORET until you can switch organization codes, and then try again. STORUSER 18-NOV-98 4 ZZZZZZZZ B00004 Trip ID not found in STORET. The Trip ID found in the batch file does not match any Trip ID in your organization's data. You may not reference a Trip in the batch until it has been identified and described to STORET using the interactive screens. Either correct the file, or use the STORET interactive screen software to create the Trip ID, and then try again. STORUSER 18-NOV-98 7 ZZZZZZZZ B00007 Field Activity ID not found in STORET. The Field Activity ID found in the batch file does not match any Field Activity ID associated with this Station Visit in STORET. If you were trying to use the batch file to create the Field Activity, you have not supplied a valid *ADD instruction on this record. Otherwise, either return to the STORET interactive screens and describe the proper field activity, or correct the Field Activity ID in your batch file, and then try again. STORUSER 18-NOV-98 12 ZZZZZZZZ B00012 Characteristic Group ID not found in STORET. The Char Group ID supplied in the batch does not match the ID of any characteristic group in your organization. STORUSER 03-DEC-98 161 ZZZZZZZZ B00249 Composite with Parents requires at least two parents. A Parent ID record has either been omitted or only one occurrence of Parent ID has been found for this composite sample. At least two Parent ID rows are required for Composite with Parents. STORUSER 18-NOV-98 164 ZZZZZZZZ B00252 Electroshock Operation Detail creation failed. The STORET database update for this operational detail failed. STORUSER 18-NOV-98 165 ZZZZZZZZ B00253 Trawl Operation Detail creation failed. The STORET database update for this operational detail failed. STORUSER 18-NOV-98 166 ZZZZZZZZ B00254 Trap Net Operation Detail creation failed. The STORET database update for this operational detail failed. STORUSER 18-NOV-98 168 ZZZZZZZZ B00256 Text field value left blank. A text-type record is present, but has no text value. STORUSER 18-NOV-98 169 ZZZZZZZZ B00257 Result Comments left blank. A Result Comments record is present, but has no text value. STORUSER 18-NOV-98 171 ZZZZZZZZ B00259 Reference Point data is only applicable for Physical Results. A Reference Point From/To record has been inadvertently supplied for a non-physical result. STORUSER 18-NOV-98 176 ZZZZZZZZ B00264 Subject Taxon Search name not found in STORET. The Field Activity Subject Taxon/Bio Result Group Subject Taxon found in the batch file does not match any Characteristic Search Name defined in STORET. STORUSER 18-NOV-98 178 ZZZZZZZZ B00266 Subject Taxon requires a Species Number. Either a Field Activity Subject Taxon or Bio Result Group Subject Taxon record has been provided whose Characteristic requires a species number, yet you have omitted the species number. STORUSER 18-NOV-98 180 ZZZZZZZZ B00268 Bio Result Group Type Indicator is invalid. The Type Indicator for the Bio Result Group is not valid. Valid values are B (for Biological) and P (for Physical). STORUSER 18-NOV-98 182 ZZZZZZZZ B00270 Sex Name is invalid. The Sex name for the Bio Result Group is not one of the permitted values. STORUSER 19-NOV-98 14 ZZZZZZZZ B00014 Characteristic Group does not match Field Activity Medium. The Char Group ID supplied in the batch must be valid for the medium of the field activity being updated. STORUSER 18-NOV-98 17 ZZZZZZZZ B00017 Result value does not match acceptable permitted values. Certain characteristics may have only values selected from a short list of permitted values. On this transaction, a value not in the list for its characteristic was supplied. STORUSER 18-NOV-98 19 ZZZZZZZZ B00019 More than one sign present in Result value string. During conversion from your result text to a numeric value, an arithmetic sign (+/-) was detected more than once. STORUSER 18-NOV-98 22 ZZZZZZZZ B00022 Result value string has more than 8 digits to the left of the decimal. In STORET, no decimal result may have more than 8 digits to the left of the decimal point. Maximum format is +ZZZZZZZZ.ZZZZZ. STORUSER 18-NOV-98 24 ZZZZZZZZ B00024 Space is imbedded in the Result value string. A result value may not contain any space(s). STORUSER 18-NOV-98 26 ZZZZZZZZ B00026 Result value left blank. Null or blank results may not be created with the batch update. STORUSER 18-NOV-98 28 ZZZZZZZZ B00028 Input file line header unrecognized. The data file is not in flat ASCII text format, with comma delimited fields and quoted text, or the file contains a misspelled or illegal header. STORUSER 18-NOV-98 29 ZZZZZZZZ B00029 Field Activity Type Name is invalid. The Activity Type for this field activity is not one of the permitted values. STORUSER 18-NOV-98 32 ZZZZZZZZ B00032 Field Activity Start Time is either blank or zero. A Start Time record is present, but has no valid value. If present, start time must be non-zero, and formatted HH:MM:SS. STORUSER 18-NOV-98 34 ZZZZZZZZ B00034 Field Activity Stop Date is either blank or zero. A Stop Date record is present, but has no valid value. If present, stop date must be non-zero, and formatted MM-DD-YYYY. STORUSER 23-DEC-98 185 ZZZZZZZZ B00273 Subject Taxon is not applicable for Multi-Taxon Population Census groups. A Bio Result Group Subject Taxon record has been inadvertently provided for a Multi-Taxon Population Census Bio Result Group. A subject taxon is required for all group types except Multi-Taxon Population Census. STORUSER 19-NOV-98 189 ZZZZZZZZ B00277 Count is not applicable for Single Taxon Frequency Classes or Multi-Taxon Population Census groups. A Count record has been inadvertently provided for a Multi-Taxon Population Census or Single Taxon Frequency Class Bio Result Group. A summary group count is required for Single Taxon Group Summary and Single Taxon Individual groups only. STORUSER 18-NOV-98 192 ZZZZZZZZ B00280 Number in group is greater than Multi-Taxon Population Census Result value. The Count supplied for the current group is greater than the Result Value/Count for the same Characteristic as provided in the Multi-Taxon Population Census group. STORUSER 19-NOV-98 193 ZZZZZZZZ B00281 Bio Result Group Subject Taxon associate failed. The STORET database update for this assignment failed. STORUSER 18-NOV-98 195 ZZZZZZZZ B00283 Bio Result Group create failed. The STORET database update for this bio result group failed. STORUSER 18-NOV-98 197 ZZZZZZZZ B00285 Characteristic Group does not match Field Activity Intent. The Char Group ID supplied in the batch must be valid for the intent of the field activity being updated. STORUSER 18-NOV-98 200 ZZZZZZZZ B00288 Individual Number is invalid for this Bio Result Group. An Individual record is present, but the Individual Number for this Single Taxon Individual group is invalid. The number must be non-zero and less than or equal to the total Count for the group. STORUSER 18-NOV-98 202 ZZZZZZZZ B00290 Primary Condition is blank or invalid. A Bio Condition record is present, but the Primary Condition component is invalid. It must be either Sex or Lifestage. STORUSER 19-NOV-98 37 ZZZZZZZZ B00037 Field Activity Depth to Activity Msr is either blank or zero. A Depth record is present, but has no valid value. If present, depth must be non-zero, and formatted ZZZZZ.ZZ. STORUSER 18-NOV-98 39 ZZZZZZZZ B00039 Field Activity Depth to Activity Unit Code is blank or invalid. The Units portion of the Depth record is not valid. Units must be either ft or m. STORUSER 18-NOV-98 42 ZZZZZZZZ B00042 Field Activity Depth to Activity Msr Unit Code is blank or invalid. The Units portion of one of the Upper/Lower Depth records is not valid. Units must be either ft or m. STORUSER 18-NOV-98 44 ZZZZZZZZ B00044 Field Activity Depth Reference Point Text is blank. A Depth Measured From record is present, but has no text value. STORUSER 18-NOV-98 46 ZZZZZZZZ B00046 Field Activity Thermocline is invalid. The Thermocline value is not one of the permitted values. Valid values are: A (above), I (in), and B (below). STORUSER 18-NOV-98 47 ZZZZZZZZ B00047 Field Activity Pycnocline is invalid. The Pycnocline value is not one of the permitted values. Valid values are: A (above), I (in), and B (below). STORUSER 18-NOV-98 50 ZZZZZZZZ B00050 Sample Total Volume Unit Code is blank or invalid. The Units portion of the Volume record is not one of the permitted values. STORUSER 18-NOV-98 52 ZZZZZZZZ B00052 Sample Total Weight Unit Code is blank or invalid. The Units portion of the Weight record is not one of the permitted values. STORUSER 18-NOV-98 53 ZZZZZZZZ B00053 Sample Container Type Name is invalid. The Container Type Name value is not one of the permitted values. STORUSER 18-NOV-98 56 ZZZZZZZZ B00056 Sample Container Size Unit Code is blank or invalid. The Units portion of the Container Size record is not one of the permitted values. STORUSER 18-NOV-98 57 ZZZZZZZZ B00057 Sample Temperature Preservation Type Name is invalid. The Temperature Preservation value is not one of the permitted values. STORUSER 18-NOV-98 219 ZZZZZZZZ B00307 Overlapping groups are not allowed. The lower and upper bounds of this Pcount result record overlap with those of another Pcount result record for this Single Taxon Frequency Class. STORUSER 19-NOV-98 79 ZZZZZZZZ B00079 Field Activity Relative Depth and Upper/Lower Depths cannot both be entered. You may not enter both a depth range (i.e. Upper Depth and Lower Depth), and a Relative Depth for a field activity. STORUSER 18-NOV-98 80 ZZZZZZZZ B00080 Field Activity Upper and Lower Depths must both be provided if either is provided. The Upper Depth and Lower Depth must be entered as a pair. Neither may be entered by itself. STORUSER 18-NOV-98 81 ZZZZZZZZ B00081 Field Activity Upper Depth is greater than Lower Depth. The numeric value of the Upper Depth must be less than that of the Lower Depth. The Upper Depth is the one closest to the surface. STORUSER 18-NOV-98 82 ZZZZZZZZ B00082 Field Activity Upper and Lower Depth unit measures do not match. Although entered separately, the Units portion of the Upper Depth and Lower Depth records must be the same. STORUSER 18-NOV-98 83 ZZZZZZZZ B00083 Sample data does not apply for Field Measurement/Observations. When the Activity Type is "Field Msr/Obs", descriptors such as Volume, Weight, Container Type Name, and so forth, may not be specified. STORUSER 18-NOV-98 84 ZZZZZZZZ B00084 Field Activity create failed. The STORET database update for this field activity failed. STORUSER 18-NOV-98 85 ZZZZZZZZ B00085 Sample default data already entered yet a default was provided. The Sample Transport ID record was supplied to provide defaults for sample descriptors, and one or more of those descriptors was also present in the batch file. STORUSER 18-NOV-98 86 ZZZZZZZZ B00086 Sample create failed. The STORET database update for this sample failed. STORUSER 18-NOV-98 76 ZZZZZZZZ B00076 Field Activity Stop Date is less than Start Date. The Stop Date (and Stop Time) may not precede the start date and time for a field activity. STORUSER 18-NOV-98 77 ZZZZZZZZ B00077 Field Activity Stop Time Zone without Stop Time. The Stop Time Zone record is present, but no Stop Time was supplied. STORUSER 18-NOV-98 6 ZZZZZZZZ B00006 Station Visit ID not found in STORET. The Station Visit ID found in the batch file does not match any Station Visit ID associated with this Trip and Station in your organization's data. You may not reference a Station Visit in the batch until it has been identified and described to STORET using the interactive screens. Either correct the file, or use the STORET interactive screen software to create the Station Visit ID, and then try again. STORUSER 18-NOV-98 8 ZZZZZZZZ B00008 Field Activity is incomplete in STORET. Before you can add results to a Field Activity, it must have a complete description in STORET. A minimal field activity has an ID, a medium, an activity category, and a start date. Samples must have collection procedures, collection gear, and actual activity location. Biological activities have additional requirements. STORUSER 18-NOV-98 9 ZZZZZZZZ B00009 Duplicate Field Activity in run. In your batch run, all data for one field activity must appear in a single block, headed by the Field Activity ID. If the same Field Activity ID appears again later in the run, it is assumed to be an error. STORUSER 18-NOV-98 11 ZZZZZZZZ B00011 Duplicate Result found for Field Activity. In examining the database as it prepares for your update, STORET found that the target field activity contained duplicate result rows. You may not update this field activity until this error is corrected. STORUSER 18-NOV-98 88 ZZZZZZZZ B00088 Field Sampling Procedure is required for Samples. When the Activity Type is "Sample", Sample Collection Procedure ID and Field Gear ID are mandatory. STORUSER 18-NOV-98 89 ZZZZZZZZ B00089 Field Activity Procedure assignment failed. The STORET database connection between the field activity and its collection procedure failed. STORUSER 18-NOV-98 91 ZZZZZZZZ B00091 Field Gear not found in STORET. The Field Gear ID supplied in the batch does not match any field gear specification in STORET. STORUSER 18-NOV-98 93 ZZZZZZZZ B00093 Gear Configuration invalid for Organization and/or Field Gear. The Gear Configuration ID supplied with the batch has never been associated with its companion Field Gear ID by your organization. STORUSER 18-NOV-98 96 ZZZZZZZZ B00096 Actual Activity Location create failed. The STORET database connection between the field activity and its actual activity location point failed. STORUSER 18-NOV-98 99 ZZZZZZZZ B00099 Field Activity Project assignment failed. The STORET database connection between the field activity and one of its projects failed. STORUSER 18-NOV-98 102 ZZZZZZZZ B00102 Habitat Class Scheme Characteristic Row ID not found in STORET. In a Result record used with a habitat assessment Char Group ID, the Row ID supplied in the batch does not match any row ID previously entered in the group in STORET. STORUSER 18-NOV-98 104 ZZZZZZZZ B00104 Duplicate Habitat Class Scheme Char referenced in Characteristic Group. Two (or more) rows in the habitat assessment Char Group ID contain duplicate characteristics. STORUSER 18-NOV-98 107 ZZZZZZZZ B00107 More than one decimal present in input string. You have supplied a numeric value which has multiple decimal points. STORUSER 18-NOV-98 109 ZZZZZZZZ B00109 Too many digits to the right of the decimal. You have supplied a numerical value which exceeds the STORET limit for digits to the right of the decimal point. STORUSER 18-NOV-98 207 ZZZZZZZZ B00295 Secondary Class Descriptor is invalid since a Secondary Condition was not provided. The Secondary Class Descriptor portion of the Bcount result record is present, yet there is no corresponding Secondary Condition in the Bio Condition record. STORUSER 18-NOV-98 209 ZZZZZZZZ B00297 Duplicate Frequency Class Result found in run. More than one Bcount result record is present with the same Primary Class Descriptor and Secondary Class Descriptor. If the same Bcount record appears more than once in the run, it is assumed to be an error. STORUSER 18-NOV-98 212 ZZZZZZZZ B00300 Physical Condition subject taxon must be a valid biological physical measurement. A Common Class record is present, but the Subject Taxon component is not a valid biological physical measurement Characteristic as defined in STORET. STORUSER 18-NOV-98 213 ZZZZZZZZ B00301 Unit of Measure could not be found in STORET. The Units portion of the Common Class record does not match any Unit of Measure defined in STORET. STORUSER 18-NOV-98 217 ZZZZZZZZ B00305 Upper Bound is invalid or blank. A Pcount result record is present, yet the Upper Bound Amount is not valid. It must be non-zero, and formatted as ZZZZZ.ZZ. STORUSER 18-NOV-98 269 ZZZZZZZZ B20017 Date is invalid. Check file for valid date in format MM-DD-YYYY. The program found a bad character (not 0-9 or -), or month, day, or year out of range. Check date input. STORUSER 22-DEC-98 5 ZZZZZZZZ B00005 Station ID not found in STORET. The Station ID found in the batch file does not match any Station ID associated with this Trip ID in your organization's data. You may not reference a Station in the batch until it has been identified and described to STORET using the interactive screens, and associated with the Trip ID. Either correct the file, or use the STORET interactive screen software to create the Station ID and/or associate it with this Trip ID, and then try again. STORUSER 18-NOV-98 13 ZZZZZZZZ B00013 Characteristic Group does not match Field Activity Type. The Char Group ID supplied in the batch must be valid for the activity type of the field activity being updated. STORUSER 03-DEC-98 222 ZZZZZZZZ B00310 Result Reference Point From/To are not applicable for Single Taxon Individual and Single Taxon Group Summary. A Reference Point From/To record has been provided for a Single Taxon Individual or Single Taxon Group Summary result. This is not supported on the associated online windows. STORUSER 18-NOV-98 223 ZZZZZZZZ B00311 Result Value Status is blank or invalid. A Result Value Status record is present, but has no valid value. If present, Result Value Status must be either P (for Preliminary) or F (for Final). STORUSER 19-NOV-98 224 ZZZZZZZZ B00312 Result Update failed. The STORET database update for this result failed. STORUSER 18-NOV-98 225 ZZZZZZZZ B00313 Cell Form Type Name is blank or invalid. The Result Cell Form is not one of the permitted values. STORUSER 18-NOV-98 226 ZZZZZZZZ B00314 Cell Shape Type Name is blank or invalid. The Result Cell Shape is not one of the permitted values. STORUSER 18-NOV-98 227 ZZZZZZZZ B00315 Laboratory ID not found in STORET. The Laboratory ID found in the batch file does not match any Laboratory ID in your organization's data. You may not reference a Lab in the batch until it has been identified and described to STORET using the interactive screens. Either correct the file, or use the STORET interactive screen software to create the Laboratory ID, and then try again. STORUSER 18-NOV-98 228 ZZZZZZZZ B00316 Laboratory Result Assignment failed. The STORET database update for this assignment failed. STORUSER 18-NOV-98 231 ZZZZZZZZ B00319 Analysis Date is required before entering Analysis Time. A Result Analysis Time record is present, but an associated Result Analysis Date record was not provided. STORUSER 18-NOV-98 233 ZZZZZZZZ B00321 Analysis Time Zone is blank or invalid. A Result Analysis Time Zone is mandatory if the Result Analysis Time is present, and it must be one of the permitted values. STORUSER 18-NOV-98 60 ZZZZZZZZ B00060 Sample Transport ID not found in STORET. The Sample Transport ID supplied in the batch does not match the ID of any "Sample Transport and Storage" default set in your organization. STORUSER 18-NOV-98 64 ZZZZZZZZ B00064 Project referenced more than once for this Field Activity. You have used multiple Project ID records to link the field activity to several projects, and have repeated yourself. STORUSER 18-NOV-98 67 ZZZZZZZZ B00067 Person referenced more than once for this Field Activity. You have used multiple Person records to link the field activity to several people, and have repeated yourself. STORUSER 18-NOV-98 68 ZZZZZZZZ B00068 Field Activity mandatory fields are missing. One or more mandatory field activity descriptors has been omitted. Note that some items are conditionally mandatory, depending on the presence of related items. STORUSER 18-NOV-98 72 ZZZZZZZZ B00072 Field Activity Replicate Number is not applicable for this Category Type Name. The Activity Category supplied with the batch is not one of the replicate activities, and you may not supply a Replicate Number field on the Activity ID record. STORUSER 18-NOV-98 74 ZZZZZZZZ B00074 Field Activity Start Time Zone without Start Time. The Start Time Zone record is present, but no Start Time was supplied. STORUSER 18-NOV-98 65 ZZZZZZZZ B00065 Person is inactive. Cannot be assigned to Field Activity. The Person named is currently in "suspended" status in your STORET database. People in your organization may be suspended (for STORET purposes) if you determine that they are not available to perform field work or lab work relating to STORET data. Suspended persons may be reactivated if appropriate. STORUSER 18-NOV-98 112 ZZZZZZZZ B00200 Field Activity Intent Type Name is invalid. The Intent for this field activity is not one of the permitted values. STORUSER 18-NOV-98 113 ZZZZZZZZ B00201 Field Activity Community Name is invalid. The Community for this field activity is not one of the permitted values. STORUSER 18-NOV-98 115 ZZZZZZZZ B00203 Community Name is only applicable for Taxon Abundance samples. The Intent for this Field Activity has either not been provided or is not Taxon Abundance. STORUSER 18-NOV-98 117 ZZZZZZZZ B00205 Data File Name Location is blank. A Data File Name Location record is present, but has no text value. STORUSER 18-NOV-98 119 ZZZZZZZZ B00207 Subject Taxon is not applicable for Biological Taxon Abundance samples. A Field Activity Subject Taxon record has been provided for a Taxon Abundance sample. It is only valid for Individual or Tissue samples. STORUSER 18-NOV-98 121 ZZZZZZZZ B00209 Electroshock Current Type Code is invalid. The Current Type is not one of the permitted values. STORUSER 18-NOV-98 123 ZZZZZZZZ B00211 Electroshock Pass Length is either blank or zero. A Pass Length record is present, but has no valid value. If present, Pass Length must be non-zero, and formatted ZZZZZ. STORUSER 18-NOV-98 126 ZZZZZZZZ B00214 Electroshock Total Energized Time is either blank or zero. A Total Energized Time record is present, but has no valid value. If present, Total Energized Time must be non-zero, and formatted ZZZ. STORUSER 18-NOV-98 128 ZZZZZZZZ B00216 Trap Net Operation Detail Sampling Duration Msr is either blank or zero. A Sampling Duration record is present, but has no valid value. If present, Sampling Duration must be non-zero, and formatted ZZ.ZZ. STORUSER 18-NOV-98 130 ZZZZZZZZ B00218 Trap Net Operation Detail Orientation to Current is blank or invalid. The Orientation to Current is not one of the permitted values. STORUSER 18-NOV-98 15 ZZZZZZZZ B00015 Characteristic Default Row ID not found in STORET. The Row ID referenced on a Result transaction was not found in the Char Group ID indicated. STORUSER 18-NOV-98 16 ZZZZZZZZ B00016 Characteristic defaults are incomplete in STORET. The defaults associated with this row in the characteristic group are incomplete. For example, a default sample fraction, unit of measure, or lab procedure may be needed, depending on the characteristic named in the row. STORUSER 18-NOV-98 18 ZZZZZZZZ B00018 Invalid characters in Result value string. For results which are numeric, characters are supplied which prevent proper conversion from the text form to the numeric form. May be triggered by typographic errors in "special" values like ND (not detected). STORUSER 18-NOV-98 20 ZZZZZZZZ B00020 More than one decimal present in Result value string. During conversion from your result text to a numeric value, a decimal point was detected more than once. STORUSER 18-NOV-98 21 ZZZZZZZZ B00021 Sign must be in position 1 of result. During conversion from your result text to a numeric value, an arithmetic sign was found somewhere other than in position 1. STORUSER 18-NOV-98 23 ZZZZZZZZ B00023 Result value string has more than 5 digits to the right of the decimal. In STORET, no decimal result may have more than 5 digits to the right of the decimal point. Maximum format is +ZZZZZZZZ.ZZZZZ. STORUSER 18-NOV-98 25 ZZZZZZZZ B00025 Duplicate Result found for Characteristic: Two (or more) result rows have the same characteristic and associated defaults. Rows are tested for uniqueness by comparing their characteristic name, sample fraction, and certain other default descriptors. STORUSER 18-NOV-98 27 ZZZZZZZZ B00027 Warning: Result value is outside acceptable range for this characteristic. This result has failed the user-specified edit check for permissible range, as found in the row of the characteristic group. This is only a warning. Data values are stored anyway. STORUSER 18-NOV-98 235 ZZZZZZZZ B00323 Location Depth to Bottom Msr is either blank or zero. A Trawl Start Depth to Bottom or Trawl Stop Depth to Bottom record is present, but has no valid value. If prsent, it must be non-zero, and formatted as ZZZZZ.ZZ. STORUSER 18-NOV-98 237 ZZZZZZZZ B00325 Location Depth to Bottom is not applicable for this Field Activity. Depth to Bottom records are only applicable for Net/Horizontal Tow activities. STORUSER 18-NOV-98 239 ZZZZZZZZ B00327 Station Visit Arrival Time is either blank or zero. An Arrival Time record is present, but has no valid value. If present, arrival time must be non-zero, and formatted HH:MM:SS. STORUSER 18-NOV-98 242 ZZZZZZZZ B00330 Station Visit Departure Time is either blank or zero. A Departure Time record is present, but has no valid value. If present, departure time must be non-zero, and formatted HH:MM:SS. STORUSER 19-NOV-98 244 ZZZZZZZZ B00332 Station Visit already exists. The Visit Number supplied with the *ADD option already exists in STORET for the trip and station you are updating. STORUSER 18-NOV-98 246 ZZZZZZZZ B00334 Station Visit Arrival Time Zone without Arrival Time. The Arrival Time Zone record is present, but no Arrival Time was supplied. STORUSER 18-NOV-98 248 ZZZZZZZZ B00336 Station Visit Departure Time without Departure Date. The Departure Time for the station visit may not be stored without the Departure Date. STORUSER 18-NOV-98 250 ZZZZZZZZ B00338 Station Visit create failed. The STORET database update for this visit failed. STORUSER 18-NOV-98 251 ZZZZZZZZ B20001 Trip ID is not allowed for data logger update. Check input file format. A Trip Monitoring batch input file was probably mistakenly selected for Automated Data Logger batch update. Run ADL batch again with an ADL batch file, or create an ADL batch file. STORUSER 18-NOV-98 66 ZZZZZZZZ B00066 Person not found in STORET. The Person named in the batch file does not match any Person in your organization's data. You may not reference a Person in the batch until it has been identified and described to STORET using the interactive screens. Either correct the file, or use the STORET interactive screen software to create the Person, and then try again. STORUSER 19-NOV-98 69 ZZZZZZZZ B00069 Field Activity already exists. The Activity ID supplied with the *ADD option already exists in STORET for the trip and station visit you are updating. STORUSER 18-NOV-98 70 ZZZZZZZZ B00070 Field Activity Category Type Name is invalid. The Activity Category supplied in the batch is not one of the permitted values. STORUSER 18-NOV-98 71 ZZZZZZZZ B00071 Field Activity Category Type Name requires a Replicate Number. The Activity Category supplied with the batch is one of the replicate activities, and you have omitted the Replicate Number field on the Activity ID record. STORUSER 18-NOV-98 73 ZZZZZZZZ B00073 Field Activity Start Date is less than Station Visit Arrival Date. The Start Date (and Start Time) for a field activity must not precede the arrival date and time found in the station visit description in STORET. STORUSER 18-NOV-98 75 ZZZZZZZZ B00075 Field Activity Stop Time without Stop Date. The Stop Time for a field activity may not be stored without the Stop Date. For activities completed on the same date as they are started, the Stop Date will be the same as the Start Date. STORUSER 18-NOV-98 78 ZZZZZZZZ B00078 Field Activity Depth to Activity and Upper/Lower Depths cannot both be entered. You may not enter both a depth range (i.e. Upper Depth and Lower Depth), and a specific Depth for a field activity. STORUSER 18-NOV-98 87 ZZZZZZZZ B00087 Field Sampling Procedures are not applicable for Measurement/Observations. When the Activity Type is "Field Msr/Obs", sample collection process descriptors such as Sample Collection Procedure ID, Field Gear ID, Gear Configuration ID, and so forth, may not be specified. STORUSER 18-NOV-98 30 ZZZZZZZZ B00030 Field Activity Medium Type Name is invalid. The Medium for this field activity is not one of the permitted values. STORUSER 18-NOV-98 31 ZZZZZZZZ B00031 Field Activity Start Date is either blank or zero. A Start Date record is present, but its value is not valid. Start date is mandatory and must be non-zero, and formatted MM-DD-YYYY. STORUSER 23-DEC-98 33 ZZZZZZZZ B00033 Field Activity Start Time Zone is invalid. The Start Time Zone is mandatory if the Start Time is present, and it must be one of the permitted values. STORUSER 18-NOV-98 35 ZZZZZZZZ B00035 Field Activity Stop Time is either blank or zero. A Stop Time record is present, but has no valid value. If present, stop time must be non-zero, and formatted HH:MM:SS. STORUSER 18-NOV-98 36 ZZZZZZZZ B00036 Field Activity Stop Time Zone is invalid. The Stop Time Zone is mandatory if the Stop Time is present, and it must be one of the permitted values. STORUSER 18-NOV-98 38 ZZZZZZZZ B00038 Text to number measure conversion failed. Attempts to convert the text form of a depth, volume, weight, container size measure, etc. to a valid number have failed. Check the field(s) for imbedded blanks, text characters (zero vs "oh" for example), multiple decimal points, sign out of place, and so forth. STORUSER 18-NOV-98 40 ZZZZZZZZ B00040 Field Activity Relative Depth Name is invalid. The Relative Depth for this field activity is not one of the permitted values. STORUSER 18-NOV-98 41 ZZZZZZZZ B00041 Field Activity Upper Depth to Activity Msr is either blank or zero. An Upper Depth record is present, but has no valid value. If present, upper depth must be non-zero, and formatted ZZZZZ.ZZ. STORUSER 18-NOV-98 43 ZZZZZZZZ B00043 Field Activity Lower Depth to Activity Msr is either blank or zero. A Lower Depth record is present, but has no valid value. If present, lower depth must be non-zero, and formatted ZZZZZ.ZZ. STORUSER 18-NOV-98 90 ZZZZZZZZ B00090 Field Gear Type does not match Field Procedure gear type. The Field Gear ID supplied in the batch represents a gear type which does not match the gear type associated with the Sample Collection Procedure ID. STORUSER 18-NOV-98 92 ZZZZZZZZ B00092 Field Activity Field Gear assignment failed. The STORET database connection between the field activity and its field gear failed. STORUSER 18-NOV-98 94 ZZZZZZZZ B00094 Field Activity Gear Configuration assignment failed. The STORET database connection between the field activity and its field gear configuration failed. STORUSER 18-NOV-98 95 ZZZZZZZZ B00095 Station ALP Point of Record not found in STORET. The station whose data you are updating does not have a defined point of record among its absolute location points. STORUSER 18-NOV-98 100 ZZZZZZZZ B00100 Field Activity Person assignment failed. The STORET database connection between the field activity and one of its people failed. STORUSER 18-NOV-98 101 ZZZZZZZZ B00101 Medium is not applicable for Habitat or Replicate Habitat measurements/observations. When the Activity Category is one of the habitat assessments, the Medium record may not be supplied. STORUSER 18-NOV-98 103 ZZZZZZZZ B00103 User defined Habitat Result create failed. The STORET database update for your habitat assessment result row failed. STORUSER 18-NOV-98 105 ZZZZZZZZ B00105 Result text value must be in double quotes. On a Result record, the value is supplied as free text, but is not enclosed in quotes. STORUSER 18-NOV-98 106 ZZZZZZZZ B00106 Invalid characters in input string. You have supplied a numeric value which has non-numeric characters imbedded in it. Check for zero vs "oh", extra dots or signs, "ell" instead of one, or misplaced blanks. STORUSER 18-NOV-98 108 ZZZZZZZZ B00108 Too many digits to the left of the decimal. You have supplied a numerical value which exceeds the STORET limit for digits to the left of the decimal point. STORUSER 18-NOV-98 110 ZZZZZZZZ B00110 Space is imbedded in input string. You have supplied a numeric value which has imbedded blank(s). STORUSER 18-NOV-98 132 ZZZZZZZZ B00220 Trap Net Operation Detail Relative Current Direction Msr must be between 0 and 359. A Trap Net Relative Current Direction record is present, but the value is not within the acceptable range of 0 through 359. STORUSER 18-NOV-98 134 ZZZZZZZZ B00222 Trap Net Operation Detail Relative Wind Direction Msr must be between 0 and 359. A Trap Net Relative Wind Direction record is present, but the value is not within the acceptable range of 0 through 359. STORUSER 18-NOV-98 136 ZZZZZZZZ B00224 Trawl Operation Detail Fished Duration Units is blank or invalid. The Units portion of the Fished Duration record is not one of the permitted values. STORUSER 18-NOV-98 138 ZZZZZZZZ B00226 Trawl Operation Detail Boat Speed Units is blank or invalid. The Units portion of the Boat Speed record is not one of the permitted values. STORUSER 18-NOV-98 140 ZZZZZZZZ B00228 Trawl Operation Detail Fished Distance Units is blank or invalid. The Units portion of the Fished Distance record is not one of the permitted values. STORUSER 18-NOV-98 142 ZZZZZZZZ B00230 Trawl Operation Detail Relative Current Direction Msr must be between 0 and 359. A Trawl Relative Current Direction record is present, but the value is not within the acceptable range of 0 through 359. STORUSER 18-NOV-98 135 ZZZZZZZZ B00223 Trawl Operation Detail Fished Duration Msr is either blank or zero. A Fished Duration record is present, but has no valid value. If present, Fished Duration must be non-zero, and formatted ZZ.ZZ. STORUSER 18-NOV-98 137 ZZZZZZZZ B00225 Trawl Operation Detail Boat Speed Msr is either blank or zero. A Boat Speed record is present, but has no valid value. If present, Boat Speed must be non-zero, and formatted ZZ.Z. STORUSER 18-NOV-98 139 ZZZZZZZZ B00227 Trawl Operation Detail Fished Distance Msr is either blank or zero. A Fished Distance record is present, but has no valid value. If present, Fished Distance must be non-zero, and formatted ZZZ.ZZ. STORUSER 18-NOV-98 45 ZZZZZZZZ B00045 Field Activity Zone Type Name is invalid. The Zone Type for this field activity is not one of the permitted values. Valid values are: Epilimnion, Mesolimnion, Hypolimnion, Epibenthic, Mesobenthic, and Hypobenthic. STORUSER 18-NOV-98 48 ZZZZZZZZ B00048 Field Activity Halocline is invalid. The Halocline value is not one of the permitted values. Valid values are: A (above), I (in), and B (below). STORUSER 18-NOV-98 49 ZZZZZZZZ B00049 Sample Total Volume is either blank or zero. A Volume record is present, but has no valid value. If present, volume must be non-zero, and formatted ZZZZZ.ZZ. STORUSER 18-NOV-98 51 ZZZZZZZZ B00051 Sample Total Weight is either blank or zero. A Weight record is present, but has no valid value. If present, weight must be non-zero, and formatted ZZZZZ.ZZ. STORUSER 18-NOV-98 54 ZZZZZZZZ B00054 Sample Container Color is invalid. The Container Color value is not one of the permitted values. STORUSER 18-NOV-98 55 ZZZZZZZZ B00055 Sample Container Size is either blank or zero. A Container Size record is present, but has no valid value. If present, Container Size must be non-zero, and formatted ZZZZ.ZZ. STORUSER 18-NOV-98 58 ZZZZZZZZ B00058 Sample Duration Time is either blank or zero. A Duration Time record is present, but has no valid value. If present, Duration Time must be non-zero, and formatted ZZZ. STORUSER 18-NOV-98 59 ZZZZZZZZ B00059 Sample Duration Units is blank or invalid. The Units portion of the Duration Time record is not one of the permitted values. STORUSER 18-NOV-98 61 ZZZZZZZZ B00061 Field Collection Procedure ID not found in STORET. The Sample Collection Procedure ID supplied in the batch does not match the ID of any "Field Sample Collection Procedure" in your organization. STORUSER 18-NOV-98 256 ZZZZZZZZ B20008 The number of Row IDs does not match the number of Characteristics in the Char Group. The Row ID record of the Automated Data Logger batch input file should contain the same Row IDs as in STORET for the Characteristic Group identified on the preceding Char Group ID record. STORUSER 19-NOV-98 258 ZZZZZZZZ B20010 Data logger batch input time contains unexpected hours, not 0 - 23. A Result record in the Automated Data Logger batch input file is supposed to contain a value following the Result header that is time in the format HHMMSS. The hours (HH) must be 0 to 23. Use two digits. STORUSER 19-NOV-98 261 ZZZZZZZZ B20014 Warning: There are fewer Results than Row IDs. In Automated Data Logger batch input, the number of Characteristic Default Row IDs on the Row ID record is greater than the number of Result values on a Result record which follows it. Add Result values, or change the Characteristic Group on the Char Group ID record and Row IDs on the Row ID record to match the results. STORUSER 19-NOV-98 266 ZZZZZZZZ B00341 Cannot reduce count below number in Single Taxon Summary Group. The Result Value/Count for the Multi-Taxon Population Census group is less than the Count for the same Characteristic in an existing Single Taxon Summary Group. STORUSER 18-NOV-98 181 ZZZZZZZZ B00269 Bio Result Group Count is either blank or zero. A Count record for the Bio Result Group is present, but its value is not valid. If present, Count must be non-zero, and formatted ZZZZZ. STORUSER 18-NOV-98 183 ZZZZZZZZ B00271 Lifestage Name is invalid. The Lifestage name of the Bio Result Group is not one of the permitted values. STORUSER 19-NOV-98 184 ZZZZZZZZ B00272 Sex and Lifestage are only applicable for Physical Conditions. Either a Sex and Lifestage record is present, yet the Bio Result Group for which it corresponds has a group type name other than Single Taxon Frequency Classes (abbreviated as STFC) or the Type Indicator is other than P for Physical Condition. STORUSER 18-NOV-98 111 ZZZZZZZZ B00111 Depth information is not applicable for habitat assessments. When the Activity Category is one of the habitat assessments, you may not supply any of the values and descriptors associated with depth. STORUSER 18-NOV-98 114 ZZZZZZZZ B00202 Biological Taxon Abundance samples require a Community Name. The Intent for this Field Activity is Taxon Abundance, but you have omitted the Community record. STORUSER 18-NOV-98 116 ZZZZZZZZ B00204 Bio Part is blank. A Biopart record is present, but has no valid value. If present, Biopart must be a valid Bio Part Name as defined in STORET. STORUSER 18-NOV-98 118 ZZZZZZZZ B00206 Biopart is not applicable for Biological Taxon Abundance samples. The Intent for this Field Activity is "Taxon Abundance". Biopart is only applicable for Tissue samples. STORUSER 18-NOV-98 120 ZZZZZZZZ B00208 Electroshock Voltage Measure is either blank or zero. An Voltage record is present, but has no valid value. If present, Voltage must be non-zero, and formatted ZZZ.ZZZ. STORUSER 18-NOV-98 122 ZZZZZZZZ B00210 Electroshock Amperage Measure is either blank or zero. An Amperage record is present, but has no valid value. If present, Amperage must be non-zero, and formatted ZZZ.ZZZ. STORUSER 18-NOV-98 124 ZZZZZZZZ B00212 Electroshock Pass Length Units is blank or invalid. The Units portion of the Pass Length record is not one of the permitted values. STORUSER 18-NOV-98 125 ZZZZZZZZ B00213 Electroshock Pulse Rate Measure is either blank or zero. A Pulse Rate record is present, but has no valid value. If present, Pulse Rate must be non-zero, and formatted ZZZ. STORUSER 18-NOV-98 127 ZZZZZZZZ B00215 Electroshock Total Energized Time Units is blank or invalid. The Units portion of the Total Energized Time record is not one of the permitted values. STORUSER 18-NOV-98 141 ZZZZZZZZ B00229 Trawl Operation Detail Relative Current Direction Msr is blank. A Trawl Relative Current Direction record is present, but has no valid value. If present, Trawl Relative Current Direction must be between 0 and 359, and formatted ZZZ. STORUSER 18-NOV-98 143 ZZZZZZZZ B00231 Trawl Net Operation Detail Relative Wind Direction Msr is blank. A Trawl Relative Wind Direction record is present, but has no valid value. If present, Trawl Relative Wind Direction must be between 0 and 359, and formatted ZZZ. STORUSER 18-NOV-98 145 ZZZZZZZZ B00233 Station is not assigned to the current Trip. The Station ID referenced in the Trawl Start record does not match any Station ID associated with this Trip ID in your organization's data. You may not reference a Station in the batch until it has been identified and described to STORET using the interactive screens, and associated with the Trip ID. Either correct the file, or use the STORET interactive screen software to create the Station ID and/or associate it with this Trip ID, and then try again. STORUSER 18-NOV-98 146 ZZZZZZZZ B00234 Stop Station must be the current Station. The Station ID referenced in the Trawl Stop record does not match the current Station ID in the batch input file. The stop station must be the same as the station currently visited for this field activity. STORUSER 18-NOV-98 147 ZZZZZZZZ B00235 Trawl Start Location is required. A Trawl Start Location record has not been provided, yet the field activity gear type is Net/Horizontal Tow. All trawl field activities require a Trawl Start Location and Trawl Stop Location. STORUSER 18-NOV-98 186 ZZZZZZZZ B00274 Subject Taxon is required. Either a Field Activity Subject Taxon or Bio Result Group Subject Taxon record has not been provided, yet the field activity or result group requires one. STORUSER 18-NOV-98 187 ZZZZZZZZ B00275 Type Indicator is required for Single Taxon Frequency Classes. A Type Indicator record has not been provided, yet the Bio Result Group has a group type name of Single Taxon Frequency Classes. Batch needs to know whether this group is a physical or biological condition. STORUSER 18-NOV-98 188 ZZZZZZZZ B00276 Count is required for Single Taxon Group Summary and Individuals. A Count record has not been provided, yet the Bio Result Group has a group type name of either Single Taxon Group Summary or Single Taxon Individuals. A summary group count is required for both of these types of groups. STORUSER 18-NOV-98 190 ZZZZZZZZ B00278 A Field Activity can have only one Multi-taxon Population Census. More than one Multi-Taxon Population Census Bio Result Group record has been provided for this field activity. Only one is allowed per field activity. STORUSER 18-NOV-98 191 ZZZZZZZZ B00279 Multi-Taxon Population Census group must be the first one added. A Multi-Taxon Population Census Bio Result Group record is present, yet it is not the first Bio Result Group record processed for this field activity. If a Multi-Taxon Population Census group is to be added, it must listed before other groups for the same field activity in the input file. STORUSER 18-NOV-98 194 ZZZZZZZZ B00282 Duplicate Bio Result Group ID found in STORET for this Field Activity. In your batch run, all data for one bio result group must appear in a single block, headed by the Bio Result Group ID. If the same Bio Result Group ID appears again later in the run, it is assumed to be an error. STORUSER 18-NOV-98 148 ZZZZZZZZ B00236 Parent Field Activity ID is invalid for Station Visit. The Parent Field Activity ID found in the batch file does not match any Field Activity ID associated with this Station Visit in STORET. If you were trying to use the batch file to create the Field Activity, you have not supplied a valid *ADD instruction on this record. Otherwise, either return to the STORET interactive screens and describe the proper field activity, or correct the Field Activity ID in your batch file, and then try again. STORUSER 18-NOV-98 157 ZZZZZZZZ B00245 Sample from Samples require a single parent. A Parent ID record has either been omitted or more than one occurrence of Parent ID has been found for this Sample from Sample. One and only one Parent ID is required for Sample from Samples. STORUSER 18-NOV-98 159 ZZZZZZZZ B00247 Parent has already been composited; it cannot be used again. A Parent ID of a Composite-with Parents can be reused for another Sample from Sample but not for another Composite-with parents. This currently invalidates the data base. STORUSER 18-NOV-98 160 ZZZZZZZZ B00248 Parent is invalid for this Field Activity. The Parent ID provided is not a valid candidate for this child field activity. The following business rules are enforced: 1. All parents must be samples. 2. If the child has a Medium of Sediment, Air or Soil, then the parent must also have the same medium type. 3. If the Sample from Sample has a Medium of Water, then the parent must have a Medium of Water, Sediment or Soil. 4. If the Composite-with Parent sample has a Medium of Water, then the parent must also have the same medium type. 5. For Biological Tissue Sample from Samples, then the parent must be either Biological Individual or Biological Tissue. 6. For Biological Tissue Composite-with Parents, then the parent must be either Biological Individual with the same Subject Taxon Characteristic or Biological Tissue with a Biopart Name. 7. For Biological Taxon Abundance Sample from Samples, then the parent must have a Medium of Water, Sediment or Soil. STORUSER 18-NOV-98 162 ZZZZZZZZ B00250 Intent must be Tissue for Biological Composite with Parents. An Intent record of Taxon Abundance or Individual was found which is invalid for Composite-with Parents. STORUSER 19-NOV-98 196 ZZZZZZZZ B00284 Characteristic Groups are not applicable for Single Taxon Frequency Classes. A Char Group ID record has been provided for a Single Taxon Frequency Class Bio Result Group. A Char Group is required for all group types except Single Taxon Frequency Classes. STORUSER 19-NOV-98 198 ZZZZZZZZ B00286 Characteristic Group does not match Bio Result Group Type Name. The Char Group ID supplied in the batch must be valid for the group type name of the Bio Result Group being updated. STORUSER 18-NOV-98 199 ZZZZZZZZ B00287 Individual Number is either blank or zero. An Individual record is present, but the Individual Number for this Single Taxon Individual group is either blank or zero. The number must be non-zero and less than or equal to the total Count for the group. STORUSER 18-NOV-98 201 ZZZZZZZZ B00289 Bio Result Group Type Indicator does not equal "B" for biological condition. A Bio Condition record is present, but there is either no associated Type Indicator record for the bio result group or it is not equal to B for biological condition. STORUSER 18-NOV-98 203 ZZZZZZZZ B00291 Secondary Condition is blank or invalid. A Bio Condition record is present, but the Secondary Condition component is invalid. If the Secondary Condition is entered, it must be either Sex or Lifestage, but it cannot be the same as the Primary Condition. STORUSER 19-NOV-98 204 ZZZZZZZZ B00292 Primary and Secondary Conditions cannot be the same. A Bio Condition record is present, but the Primary and Secondary Conditions are the same. STORUSER 18-NOV-98 205 ZZZZZZZZ B00293 Primary Class Descriptor is blank or invalid. A Bcount result record is present, yet the Primary Class Descriptor is invalid. It must be a valid Characteristic Permitted Value of the Primary Condition. For example, if the primary condition is "Sex", then one valid primary class descriptor is "Female". STORUSER 18-NOV-98 163 ZZZZZZZZ B00251 Mandatory data missing for operational details. One or more mandatory operational detail descriptors has been omitted. Note that these details are conditionally mandatory. If any operational details are provided, then the mandatory descriptors are required. STORUSER 18-NOV-98 167 ZZZZZZZZ B00255 Location is not supported for Sample from Samples and Composite-with Parents. When the Activity Category is either Created from Sample or Composite-with Parents, you may not supply any of the values associated with location. STORUSER 19-NOV-98 170 ZZZZZZZZ B00258 Result Comments could not be added. The STORET database update for this result failed. STORUSER 18-NOV-98 172 ZZZZZZZZ B00260 Reference Point From value left blank. Both are required. A Reference Point From/To record has been provided, but the "from" component has no text value. Both the "from" and "to" components are required. STORUSER 18-NOV-98 173 ZZZZZZZZ B00261 Reference Point To value left blank. Both are required. A Reference Point From/To record has been provided, but the "to" component has no text value. Both the "from" and "to" components are required. STORUSER 18-NOV-98 174 ZZZZZZZZ B00262 Bio Result Group Type Name is blank or invalid. The Type Name portion of the Bio Result Group record is not valid. Valid abbreviated values are: MTPC - Multi-Taxon Population Census STGS - Single Taxon Group Summary STI - Single Taxon Individual STFC - Single Taxon Frequency Classes (Biological Conditions and Physical Conditions) STORUSER 19-NOV-98 175 ZZZZZZZZ B00263 Subject Taxon is blank. Either the Field Activity Subject Taxon or Bio Result Group Subject Taxon record is present, but has no valid value. If present, the subject taxon must be a valid Characteristic Search Name as defined in STORET followed by a species number, if required. Valid values for species number are sp.1 through sp.9. STORUSER 18-NOV-98 206 ZZZZZZZZ B00294 Secondary Class Descriptor is required since a Secondary Condition was provided. The Secondary Class Descriptor portion of the Bcount result record is missing. If a Secondary Condition is provided in the Bio Condition record, then there must be an associated Secondary Class Descriptor in the Bcount record. The Secondary Class Descriptor must be a valid Characteristic Permitted Value of the Secondary Condition. STORUSER 18-NOV-98 208 ZZZZZZZZ B00296 Secondary Class Descriptor is invalid. A Bcount result record is present, yet the Secondary Class Descriptor is invalid. It must be a valid Characteristic Permitted Value of the Secondary Condition. For example, if the secondary condition is "Lifestage", then one valid secondary class descriptor is "Adult". STORUSER 18-NOV-98 210 ZZZZZZZZ B00298 Bio Result Group Type Indicator does not equal "P" for physical condition. A Common Class record is present, but there is either no associated Type Indicator record for the bio result group or it is not equal to P for physical condition. STORUSER 18-NOV-98 211 ZZZZZZZZ B00299 Physical Condition subject taxon is blank or invalid. A Common Class record is present, but the Subject Taxon component is not valid. It must be a valid Characteristic Search Name as defined in STORET, specifically a valid biological physical measurement. STORUSER 18-NOV-98 214 ZZZZZZZZ B00302 Unit of Measure is invalid for this Characteristic. The Units portion of the Common Class record is invalid for the type of Subject Taxon Characteristic provided. STORUSER 18-NOV-98 216 ZZZZZZZZ B00304 Lower Bound is invalid or blank. A Pcount result record is present, yet the Lower Bound Amount is not valid. It must be non-zero, and formatted as ZZZZZ.ZZ. STORUSER 18-NOV-98 218 ZZZZZZZZ B00306 Upper bound amount is less than lower bound amount. For a given Pcount result record, the Lower Bound Amount must be less than or equal to the Upper Bound Amount. STORUSER 18-NOV-98 220 ZZZZZZZZ B00308 Sum of counts is greater than the Result value. The total sum of the Pcount result values/counts is greater than the Result Value/Count for the same Characteristic in the Multi-Taxon Population Census group. STORUSER 18-NOV-98 62 ZZZZZZZZ B00062 Absolute Location Point invalid for Station. The Location reference to an absolute location point supplied in the batch does not identify any point defined for the station you are updating. Both the point type and its sequence number must match. STORUSER 18-NOV-98 63 ZZZZZZZZ B00063 Project ID invalid for Trip and Station. The Project ID supplied in the batch to link the field activity to a project does not match a project supported by this trip, or does not have this station assigned to it. Check the projects supported by the trip and the stations assigned to these projects in STORET as needed. STORUSER 18-NOV-98 229 ZZZZZZZZ B00317 Result Analysis Date is either blank or zero. A Result Analysis Date record is present, but its value is not valid. If present, analysis date must be non-zero, and formatted MM-DD-YYYY. STORUSER 23-DEC-98 230 ZZZZZZZZ B00318 Result Analysis Time is either blank or zero. A Result Analysis Time record is present, but has no valid value. If present, analysis time must be non-zero, and formatted HH:MM:SS. STORUSER 18-NOV-98 232 ZZZZZZZZ B00320 Analysis Date and Time are required before entering Analysis Time Zone. An Result Analysis Time Zone record is present, but an associated Result Analysis Date and/or Result Analysis Time record was not provided. STORUSER 18-NOV-98 234 ZZZZZZZZ B00322 Result Cell Descriptors are only applicable for Phytoplankton/Zooplankton Multi-Taxon Population Census groups. Either a Result Cell Shape or Result Cell Form record is present for a Community other than Phytoplankton/Zooplankton or a Bio Result Group other than Multi-Taxon Population Census. STORUSER 18-NOV-98 236 ZZZZZZZZ B00324 Location Depth to Bottom Units is blank or invalid. The Units portion of one of the Depth to Bottom records is not valid. Units must be either ft or m. STORUSER 18-NOV-98 238 ZZZZZZZZ B00326 Station Visit Arrival Date is either blank or zero. An Arrival Date record is present, but its value is not valid. If present, arrival date must be non-zero, and formatted MM-DD-YYYY. STORUSER 23-DEC-98 129 ZZZZZZZZ B00217 Trap Net Operation Detail Sampling Duration Units is blank or invalid. The Units portion of the Sampling Duration record is not one of the permitted values. STORUSER 18-NOV-98 131 ZZZZZZZZ B00219 Trap Net Operation Detail Relative Current Direction Msr is blank. A Trap Net Relative Current Direction record is present, but has no valid value. If present, Trap Net Relative Current Direction must be between 0 and 359, formatted ZZZ. STORUSER 18-NOV-98 133 ZZZZZZZZ B00221 Trap Net Operation Detail Relative Wind Direction Msr is blank. A Trap Net Relative Wind Direction record is present, but has no valid value. If present, Trap Net Relative Wind Direction must be between 0 and 359, and formatted ZZZ. STORUSER 18-NOV-98 262 ZZZZZZZZ B20015 There are more Results than Row IDs. In Automated Data Logger batch input, there are more Result values on the Result record than characteristic Row IDs, to which they must be matched, on the preceding Row ID record. Delete Result values, or change the Characteristic Group on the Char Group ID record and Row IDs on the Row ID record to match the results. STORUSER 19-NOV-98 263 ZZZZZZZZ B20016 Result create failed. The STORET database update for this Automated Data Logger Result record failed. STORUSER 19-NOV-98 270 ZZZZZZZZ B20018 Data logger batch input time invalid length. Check input for format HHMMSS. In Automated Data Logger batch input, the time string in a RESULT line must be 6 characters long. Use two digits each for hours, minutes and seconds, without colons. Check input file. STORUSER 22-DEC-98 271 ZZZZZZZZ I00001 For Information Only Gives the user the record currently being processed. This is for information purposes only. STORUSER 03-DEC-98 275 ZZZZZZZZ B00344 Trawl Location information is not applicable for this Field Activity. If this is a child Field Activity (i.e., Activity Category is Created from Sample or Composite-with Parents) or if the gear type for this activity is something other than "Net/Horizontal Tow", then trawl location is not permitted. STORUSER 09-DEC-98 177 ZZZZZZZZ B00265 Species Number is invalid. A species number has been provided for a Field Activity Subject Taxon/Bio Result Group Subject Taxon Characteristic for which it is not required or the value entered is invalid. Valid values are sp.1 through sp.9. STORUSER 18-NOV-98 179 ZZZZZZZZ B00267 Bio Result Group Type Indicator is only valid for Single Taxon Frequency Classes. A Type Indicator record is present, yet the Bio Result Group for which it corresponds has a group type name other than Single Taxon Frequency Classes (abbreviated as STFC). STORUSER 18-NOV-98 240 ZZZZZZZZ B00328 Station Visit Arrival Time Zone is invalid. The Arrival Time Zone is mandatory if the Arrival Time is present, and it must be one of the permitted values. STORUSER 18-NOV-98 241 ZZZZZZZZ B00329 Station Visit Departure Date is either blank or zero. A Departure Date record is present, but has no valid value. If present, departure date must be non-zero, and formatted MM-DD-YYYY. STORUSER 23-DEC-98 243 ZZZZZZZZ B00331 Station Visit Departure Time Zone is invalid. The Departure Time Zone is mandatory if the Departure Time is present, and it must be one of the permitted values. STORUSER 18-NOV-98 245 ZZZZZZZZ B00333 Station Visit Arrival Date is less than Trip Start Date. The Arrival Date must be greater than or equal to the start date of the trip. STORUSER 18-NOV-98 247 ZZZZZZZZ B00335 Station Visit Departure Date is less than Arrival Date. The Departure Date may not precede the arrival date for the station visit. STORUSER 18-NOV-98 249 ZZZZZZZZ B00337 Station Visit Departure Time Zone without Departure Time. The Departure Time Zone record is present, but no DepartureTime was supplied. STORUSER 18-NOV-98 264 ZZZZZZZZ B00339 Characteristic Group does not match Field Activity Community. The Char Group ID supplied in the batch must be valid for the community of the field activity being updated. STORUSER 18-NOV-98 265 ZZZZZZZZ B00340 Cannot reduce count below number in Single Taxon Frequency Classes. The Result Value/Count for the Multi-Taxon Population Census group is less than the total count/sum of results for the same Characteristic in an existing Single Taxon Frequency Class group. STORUSER 18-NOV-98 267 ZZZZZZZZ B00342 Cannot reduce count to less than the number of individuals. The Result Value/Count for the Multi-Taxon Population Census group is less than the Count for the same Characteristic in an existing Single Taxon Individuals group. STORUSER 18-NOV-98 221 ZZZZZZZZ B00309 Result Comments are not applicable for Single Taxon Individual and Single Taxon Group Summary. A Result Comments record has been provided for a Single Taxon Individual or Single Taxon Group Summary result. This is not supported on the associated online windows. STORUSER 18-NOV-98 252 ZZZZZZZZ B20002 The number of batch input Field Activities does not match the number in STORET. The Automated Data Logger batch program counts the number of Result records in the batch for the Operating Period identified in the preceding Op Log record, and compares the count with the number of Field Activities for the same Operating Period in STORET. There should be a one-to-one correspondence. The correct number of Field Activities can be determined in STORET by going to OP2 Operating Period Data Entry, under O3 Organization Menu, Automated Data Recording Results. STORUSER 19-NOV-98 253 ZZZZZZZZ B20003 Visit Number is not allowed for data logger update. Check input file format. A Trip Monitoring batch input file was probably mistakenly selected for Automated Data Logger batch update. Run ADL batch again with an ADL batch file, or create an ADL batch file. STORUSER 18-NOV-98 254 ZZZZZZZZ B20004 Automated data logger Installation ID not found in STORET. The Installation ID line in the automated data logger batch input file contains an ID that does not match any found in STORET. You may not reference a data logger in the batch until it has been identified and described to STORET using the interactive screens. Either correct the file, or use the STORET interactive screen software to create the Installation ID, and then try again. STORUSER 23-DEC-98 255 ZZZZZZZZ B20005 Operating Period Log File Name not found in STORET. The Operating Period Log File Name found in the batch file does not match any Operating Period Log File Name for the given Automated Data Logger in your organization's data. You may not reference an Operating Period in the batch until it has been identified and described to STORET using the interactive screens. Either correct the file, or use the STORET interactive screen software to create the Operating Period, and then try again. STORUSER 19-NOV-98 268 ZZZZZZZZ B20007 Results have already been loaded for the Operating Period. In Automated Data Logger batch input, once an input Field Activity is validated, the program checks to see if any Result records already exist in STORET for that Field Activity/Operating Period. You cannot add another characteristic group or incrementally add results for an Operating Period. Go to STORET, O3 Organization Menu, and select Automated Data Recording Results to view existing results. STORUSER 18-NOV-98 257 ZZZZZZZZ B20009 Data logger batch input time contains unexpected characters, not 0 - 9. A Result record in the Automated Data Logger batch input file contains a value following the Result header that contains a character other than 0 to 9. Check input file and make sure Result is followed by time in the format HHMMSS (no colons). STORUSER 19-NOV-98 259 ZZZZZZZZ B20011 Data logger batch input time contains unexpected minutes or seconds, not 0 - 59. A Result record in the Automated Data Logger batch input file contains a value following the Result header that is supposed to be time in the format HHMMSS. The minutes (MM) or seconds (SS) must be 0 to 59. Use two digits. STORUSER 19-NOV-98 260 ZZZZZZZZ B20012 Field Activity Date/Time not found in STORET. In Automated Data Logger batch update input, a combination of date from a Record Date record, and time from a Result record does not correspond to a STORET Field Activity Start Date and Start Time for the given Operating Period. Correct the date and/or time in the input so that it matches a Field Activity in STORET. STORUSER 19-NOV-98